wireless - WiFi can't connect 4WAY_HANDSHAKE_TIMEOUT and DEAUTH_LEAVING - Ask Ubuntu


ubuntu 16.04 on uefi chipset atheros ar9485, on windows 10 same not work

lshw -c network *-network                       description: ethernet interface        product: rtl8111/8168/8411 pci express gigabit ethernet controller        vendor: realtek semiconductor co., ltd.        physical id: 0        bus info: pci@0000:02:00.0        logical name: enp2s0        version: 0c        serial: 40:8d:5c:e3:88:75        size: 10mbit/s        capacity: 1gbit/s        width: 64 bits        clock: 33mhz        capabilities: pm msi pciexpress msix vpd bus_master cap_list ethernet physical tp mii 10bt 10bt-fd 100bt 100bt-fd 1000bt 1000bt-fd autonegotiation        configuration: autonegotiation=on broadcast=yes driver=r8169 driverversion=2.3lk-napi duplex=half firmware=rtl8168g-2_0.0.1 02/06/13 latency=0 link=no multicast=yes port=mii speed=10mbit/s        resources: irq:44 ioport:e000(size=256) memory:fe900000-fe900fff memory:d0000000-d0003fff   *-network        description: wireless interface        product: ar9485 wireless network adapter        vendor: qualcomm atheros        physical id: 0        bus info: pci@0000:03:00.0        logical name: wlp3s0        version: 01        serial: 60:e3:27:24:e5:0b        width: 64 bits        clock: 33mhz        capabilities: pm msi pciexpress bus_master cap_list rom ethernet physical wireless        configuration: broadcast=yes driver=ath9k driverversion=4.4.0-21-generic firmware=n/a latency=0 link=no multicast=yes wireless=ieee 802.11bgn        resources: irq:45 memory:fe800000-fe87ffff memory:fe880000-fe88ffff  sudo dmesg | grep ath [   12.636516] ath9k 0000:03:00.0: enabling device (0000 -> 0002) [   12.643638] ath: eeprom regdomain: 0x21 [   12.643639] ath: eeprom indicates should expect direct regpair map [   12.643641] ath: country alpha2 being used: au [   12.643642] ath: regpair used: 0x21 [   12.891402] ath9k 0000:03:00.0 wlp3s0: renamed wlan0  sudo dmesg | grep wlp [   12.891402] ath9k 0000:03:00.0 wlp3s0: renamed wlan0 [   29.768305] ipv6: addrconf(netdev_up): wlp3s0: link not ready [   29.782362] ipv6: addrconf(netdev_up): wlp3s0: link not ready [   30.441829] ipv6: addrconf(netdev_up): wlp3s0: link not ready [  426.495662] wlp3s0: authenticate c4:27:95:bf:0b:ab [  426.515481] wlp3s0: send auth c4:27:95:bf:0b:ab (try 1/3) [  427.521531] wlp3s0: authenticated [  427.562125] wlp3s0: associate c4:27:95:bf:0b:ab (try 1/3) [  428.866011] wlp3s0: associate c4:27:95:bf:0b:ab (try 2/3) [  429.565278] wlp3s0: rx assocresp c4:27:95:bf:0b:ab (capab=0x1411 status=0 aid=2) [  429.565376] wlp3s0: associated [  429.565399] ipv6: addrconf(netdev_change): wlp3s0: link becomes ready [  430.612823] wlp3s0: limiting tx power 20 (20 - 0) dbm advertised c4:27:95:bf:0b:ab [  437.640774] wlp3s0: deauthenticated c4:27:95:bf:0b:ab (reason: 15=4way_handshake_timeout) [  438.542598] wlp3s0: authenticate c4:27:95:bf:0b:ab [  438.562646] wlp3s0: send auth c4:27:95:bf:0b:ab (try 1/3) [  439.568431] wlp3s0: authenticated [  439.605263] wlp3s0: associate c4:27:95:bf:0b:ab (try 1/3) [  440.865148] wlp3s0: associate c4:27:95:bf:0b:ab (try 2/3) [  441.608249] wlp3s0: rx assocresp c4:27:95:bf:0b:ab (capab=0x1411 status=0 aid=2) [  441.608331] wlp3s0: associated [  442.612472] wlp3s0: limiting tx power 20 (20 - 0) dbm advertised c4:27:95:bf:0b:ab [  449.639611] wlp3s0: deauthenticated c4:27:95:bf:0b:ab (reason: 15=4way_handshake_timeout) [  450.557775] wlp3s0: authenticate c4:27:95:bf:0b:ab [  450.577663] wlp3s0: send auth c4:27:95:bf:0b:ab (try 1/3) [  451.583377] wlp3s0: authenticated [  451.620234] wlp3s0: associate c4:27:95:bf:0b:ab (try 1/3) [  452.864288] wlp3s0: associate c4:27:95:bf:0b:ab (try 2/3) [  453.623324] wlp3s0: rx assocresp c4:27:95:bf:0b:ab (capab=0x1411 status=0 aid=2) [  453.623405] wlp3s0: associated [  454.627567] wlp3s0: limiting tx power 20 (20 - 0) dbm advertised c4:27:95:bf:0b:ab [  461.654641] wlp3s0: deauthenticated c4:27:95:bf:0b:ab (reason: 15=4way_handshake_timeout) [  462.564626] wlp3s0: authenticate c4:27:95:bf:0b:ab [  462.584507] wlp3s0: send auth c4:27:95:bf:0b:ab (try 1/3) [  463.590518] wlp3s0: authenticated [  463.623296] wlp3s0: associate c4:27:95:bf:0b:ab (try 1/3) [  464.851173] wlp3s0: associate c4:27:95:bf:0b:ab (try 2/3) [  465.626273] wlp3s0: rx assocresp c4:27:95:bf:0b:ab (capab=0x1411 status=0 aid=2) [  465.626357] wlp3s0: associated [  466.634404] wlp3s0: limiting tx power 20 (20 - 0) dbm advertised c4:27:95:bf:0b:ab [  473.661779] wlp3s0: deauthenticated c4:27:95:bf:0b:ab (reason: 15=4way_handshake_timeout) [  474.543485] wlp3s0: authenticate c4:27:95:bf:0b:ab [  474.563594] wlp3s0: send auth c4:27:95:bf:0b:ab (try 1/3) [  475.569526] wlp3s0: authenticated [  475.610243] wlp3s0: associate c4:27:95:bf:0b:ab (try 1/3) [  476.087644] ipv6: addrconf(netdev_up): wlp3s0: link not ready [  476.090328] wlp3s0: aborting association c4:27:95:bf:0b:ab local choice (reason: 3=deauth_leaving) 

with nohwcrypt receive result :

[   13.442577] ath9k 0000:03:00.0 wlp3s0: renamed wlan0 [   31.301987] ipv6: addrconf(netdev_up): wlp3s0: link not ready [   31.316009] ipv6: addrconf(netdev_up): wlp3s0: link not ready [   32.325719] ipv6: addrconf(netdev_up): wlp3s0: link not ready [  218.161456] ath9k 0000:03:00.0 wlp3s0: renamed wlan0 [  218.187056] ipv6: addrconf(netdev_up): wlp3s0: link not ready [  218.202225] ipv6: addrconf(netdev_up): wlp3s0: link not ready [  218.296818] ipv6: addrconf(netdev_up): wlp3s0: link not ready [  229.199892] wlp3s0: authenticate 0c:41:3e:f0:3b:26 [  229.220029] wlp3s0: send auth 0c:41:3e:f0:3b:26 (try 1/3) [  229.862815] wlp3s0: send auth 0c:41:3e:f0:3b:26 (try 2/3) [  230.225963] wlp3s0: authenticated [  230.266560] wlp3s0: associate 0c:41:3e:f0:3b:26 (try 1/3) [  230.874514] wlp3s0: associate 0c:41:3e:f0:3b:26 (try 2/3) [  231.898434] wlp3s0: associate 0c:41:3e:f0:3b:26 (try 3/3) [  232.269817] wlp3s0: rx assocresp 0c:41:3e:f0:3b:26 (capab=0x431 status=0 aid=1) [  232.269900] wlp3s0: associated [  232.269917] ipv6: addrconf(netdev_change): wlp3s0: link becomes ready [  232.270992] wlp3s0: deauthenticated 0c:41:3e:f0:3b:26 (reason: 9=sta_req_assoc_without_auth) [  239.579091] wlp3s0: authenticate 0c:41:3e:f0:3b:26 [  239.599255] wlp3s0: send auth 0c:41:3e:f0:3b:26 (try 1/3) [  240.604974] wlp3s0: authenticated [  240.637767] wlp3s0: associate 0c:41:3e:f0:3b:26 (try 1/3) [  241.897723] wlp3s0: associate 0c:41:3e:f0:3b:26 (try 2/3) [  242.640678] wlp3s0: rx assocresp 0c:41:3e:f0:3b:26 (capab=0x431 status=12 aid=1) [  242.640686] wlp3s0: 0c:41:3e:f0:3b:26 denied association (code=12) [  243.906642] wlp3s0: authenticate 0c:41:3e:f0:3b:26 [  243.926702] wlp3s0: send auth 0c:41:3e:f0:3b:26 (try 1/3) [  244.861338] wlp3s0: send auth 0c:41:3e:f0:3b:26 (try 2/3) [  244.932434] wlp3s0: authenticated [  244.969436] wlp3s0: associate 0c:41:3e:f0:3b:26 (try 1/3) [  245.873131] wlp3s0: associate 0c:41:3e:f0:3b:26 (try 2/3) [  246.861317] wlp3s0: associate 0c:41:3e:f0:3b:26 (try 3/3) [  246.972470] wlp3s0: rx assocresp 0c:41:3e:f0:3b:26 (capab=0x431 status=0 aid=1) [  246.972551] wlp3s0: associated [  246.973463] wlp3s0: deauthenticated 0c:41:3e:f0:3b:26 (reason: 9=sta_req_assoc_without_auth) [  264.792703] wlp3s0: authenticate 0c:41:3e:f0:3b:26 [  264.812955] wlp3s0: send auth 0c:41:3e:f0:3b:26 (try 1/3) [  265.818621] wlp3s0: authenticated [  265.855352] wlp3s0: associate 0c:41:3e:f0:3b:26 (try 1/3) [  266.871419] wlp3s0: associate 0c:41:3e:f0:3b:26 (try 2/3) [  267.858468] wlp3s0: rx assocresp 0c:41:3e:f0:3b:26 (capab=0x431 status=12 aid=1) [  267.858475] wlp3s0: 0c:41:3e:f0:3b:26 denied association (code=12) [  279.375190] wlp3s0: authenticate 0c:41:3e:f0:3b:26 [  279.395518] wlp3s0: send auth 0c:41:3e:f0:3b:26 (try 1/3) [  280.401119] wlp3s0: authenticated [  280.441997] wlp3s0: associate 0c:41:3e:f0:3b:26 (try 1/3) [  281.893745] wlp3s0: associate 0c:41:3e:f0:3b:26 (try 2/3) [  282.445123] wlp3s0: rx assocresp 0c:41:3e:f0:3b:26 (capab=0x431 status=12 aid=1) [  282.445130] wlp3s0: 0c:41:3e:f0:3b:26 denied association (code=12) [  293.647970] ipv6: addrconf(netdev_up): wlp3s0: link not ready [  677.645980] wlp3s0: authenticate 0c:41:3e:f0:3b:26 [  677.666177] wlp3s0: send auth 0c:41:3e:f0:3b:26 (try 1/3) [  678.671957] wlp3s0: authenticated [  678.704692] wlp3s0: associate 0c:41:3e:f0:3b:26 (try 1/3) [  679.832583] wlp3s0: associate 0c:41:3e:f0:3b:26 (try 2/3) [  680.707752] wlp3s0: rx assocresp 0c:41:3e:f0:3b:26 (capab=0x431 status=0 aid=1) [  680.707841] wlp3s0: associated [  680.707855] ipv6: addrconf(netdev_change): wlp3s0: link becomes ready [  690.976770] wlp3s0: authenticate 0c:41:3e:f0:3b:26 [  690.996890] wlp3s0: send auth 0c:41:3e:f0:3b:26 (try 1/3) [  691.819670] wlp3s0: send auth 0c:41:3e:f0:3b:26 (try 2/3) [  692.002743] wlp3s0: authenticated [  692.035481] wlp3s0: associate 0c:41:3e:f0:3b:26 (try 1/3) [  692.819573] wlp3s0: associate 0c:41:3e:f0:3b:26 (try 2/3) [  693.831440] wlp3s0: associate 0c:41:3e:f0:3b:26 (try 3/3) [  694.038496] wlp3s0: rx assocresp 0c:41:3e:f0:3b:26 (capab=0x431 status=0 aid=1) [  694.038579] wlp3s0: associated [  694.038705] wlp3s0: deauthenticated 0c:41:3e:f0:3b:26 (reason: 9=sta_req_assoc_without_auth) 

some 1 has idea ?

the messgae, "reason: 15=4way_handshake_timeout" suggests there problem password. assume have double- , triple-checked password have entered correct in both ubuntu , windows. please check in router's administration pages verify again.

next, there 2 methods achieve encryption, hardware , software. try disabling hardware encryption , see if helps. please open terminal , do:

sudo modprobe -r ath9k sudo modprobe ath9k nohwcrypt=1 

now can connect? if so, we'll make change permanent:

sudo -i echo "options ath9k nohwcrypt=1"  >  /etc/modprobe.d/ath9k.conf exit 

if still unable connect, check again encryption key in router. use numbers , letters , not use symbols or spaces. reboot router.

next, see:

ath: country alpha2 being used: au

i recommend regulatory domain set explicitly. check yours:

sudo iw reg 

if 00, one-size-maybe-fits-all setting. find yours here: http://en.wikipedia.org/wiki/iso_3166-1_alpha-2 set temporarily:

sudo iw reg set 

of course, substitute country code if not iceland. set permanently:

gksudo gedit /etc/default/crda 

use nano or kate or leafpad if don't have text editor gedit.

change last line read:

regdomain=is 

proofread carefully, save , close text editor.


Comments

Popular posts from this blog

download - Firefox cannot save files (most of the time), how to solve? - Super User

windows - "-2146893807 NTE_NOT_FOUND" when repair certificate store - Super User

sql server - "Configuration file does not exist", Event ID 274 - Super User